refactor: 将版本号注入移至构建配置

新增通过系统对话框导入配置文件的功能
在界面上显示当前打开的配置文件路径
添加对50%击穿电压的验证
优化开发模式下的文件导入备用方案

.gitignore

@@ -15,3 +15,7 @@ node_modules
 *.log
 *.lock
 *.pdf
+lightening.ico
+metadata.yml
+VERSION
+生成exe图标.png

Makefile

@@ -1,6 +1,15 @@
-target: dist build
+gui: build
-	create-version-file metadata.yml --outfile build/file_version_info.txt
+	uv run python update_version.py
-	pyinstaller -F main.py --version-file build/file_version_info.txt -n Lightening
+	cd webui && npm run build
+	cd ..
+	uv run pyinstaller webview_app.py -n LighteningGUI --noconsole --add-data "webui/dist;webui/dist" -y --icon lightening.ico
+
+console: dist build
+	uv run python update_version.py
+	cd webui && npm run build
+	cd ..
+	uv run create-version-file metadata.yml --outfile build/file_version_info.txt
+	uv run pyinstaller -F main.py --version-file build/file_version_info.txt -n Lightening
 	
 dist:
 	mkdir dist

README.md

@@ -18,6 +18,7 @@
 ### 环境要求
 
 - Python >= 3.12
+- Node.js >= 18（图形界面开发需要）
 
 ### 安装依赖
 
@@ -33,7 +34,6 @@ pip install -r requirements.txt
 
 - ezdxf - DXF文件生成
 - loguru - 日志记录
-- matplotlib - 数据可视化和动画
 - numpy - 数值计算
 - tomli - TOML配置文件解析
 - pywebview - 图形界面框架
@@ -122,10 +122,10 @@ python webview_app.py
 rated_voltage = 750        # 额定电压等级 (kV)
 h_c_sag = 14.43            # 导线弧垂 (m)
 h_g_sag = 11.67            # 地线弧垂 (m)
-insulator_c_len = 7.02     # 导线串子绝缘长度 (m)
+insulator_c_len = 7.4      # 导线串子绝缘长度 (m)
 string_c_len = 9.2         # 导线串长 (m)
 string_g_len = 0.5         # 地线串长 (m)
-h_arm = [150, 130]         # 导、地线挂点垂直距离 (m)，第一个值为地线挂点高度
+h_arm = [130, 100]         # 导、地线挂点垂直距离 (m)，第一个值为地线挂点高度
 gc_x = [17.9, 17]          # 导、地线水平坐标 (m)
 ground_angels = [0]        # 地面倾角 (°)，向下为正，支持多个角度
 altitude = 1000            # 海拔高度 (m)
@@ -141,7 +141,7 @@ Ip_a = -1            # 雷电流概率密度曲线系数a，大于0时使用此
 Ip_b = -1            # 雷电流概率密度曲线系数b，大于0时使用此值
 ```
 
-注意：当 `ng` > 0 时，不会通过雷暴日计算地闪密度；当 `Ip_a` 和 `Ip_b` > 0 时，不会使用默认雷暴日对应的概率密度。
+**注意**：当 `ng` > 0 时，不会通过雷暴日计算地闪密度；当 `Ip_a` 和 `Ip_b` > 0 时，不会使用默认雷暴日对应的概率密度。
 
 ### [optional] - 可选参数
 
@@ -189,25 +189,28 @@ EGM/
 ├── animation.py            # 动画演示模块
 ├── webview_app.py          # pywebview 图形界面后端
 ├── article.toml            # 示例配置文件
+├── default.toml            # 默认配置文件
 ├── Makefile                # 构建脚本
 ├── pyproject.toml          # 项目配置
 ├── README.md               # 说明文档
 ├── webui/                  # 图形界面前端项目
 │   ├── src/
 │   │   ├── components/
-│   │   │   └── ParameterForm.vue
+│   │   │   ├── ParameterForm.vue  # 参数表单组件
+│   │   │   ├── Animation.vue      # 动画可视化组件
+│   │   │   └── Log.vue            # 日志显示组件
 │   │   ├── types/
-│   │   │   └── index.ts
+│   │   │   └── index.ts           # TypeScript 类型定义
-│   │   ├── App.vue
+│   │   ├── App.vue                # 主应用组件
-│   │   ├── main.ts
+│   │   ├── main.ts                # 应用入口
-│   │   └── style.css
+│   │   └── style.css              # 全局样式
-│   ├── package.json
+│   ├── package.json               # 前端依赖配置
-│   ├── vite.config.ts
+│   ├── vite.config.ts             # Vite 配置
-│   ├── tsconfig.json
+│   ├── tsconfig.json              # TypeScript 配置
-│   ├── tailwind.config.js
+│   ├── tailwind.config.js         # Tailwind CSS 配置
-│   ├── postcss.config.js
+│   └── index.html                 # HTML 入口
-│   └── index.html
+├── CSharp/                 # C# 版本实现
-└── CSharp/                 # C# 版本实现
+└── 历史/                   # 历史配置文件和DXF文件
 ```
 
 ## 技术支持

animation.py

@@ -1,94 +0,0 @@
-import matplotlib.pyplot as plt
-from functools import wraps
-import numpy as np
-
-
-class Animation:
-    def __init__(self) -> None:
-        fig, ax = plt.subplots()
-        self._fig = fig
-        self._ax = ax
-        self._ticks = 0
-        self._disable = False
-        self.init_fig()
-        pass
-
-    @staticmethod
-    def switch_decorator(func):
-        @wraps(func)
-        def not_run(cls, *args, **kwargs):
-            # print("not run")
-            pass
-
-        @wraps(func)
-        def wrapTheFunction(cls, *args, **kwargs):
-            if not cls._disable:
-                # print("desc")
-                return func(cls, *args, **kwargs)
-            return not_run(cls, *args, **kwargs)
-
-        return wrapTheFunction
-
-    def enable(self, _enable):
-        self._disable = not _enable
-
-    @switch_decorator
-    def init_fig(self):
-        ax = self._ax
-        ax.set_aspect(1)
-        ax.set_xlim([-500, 500])
-        ax.set_ylim([-500, 500])
-
-    @switch_decorator
-    def show(self):
-        self._fig.show()
-
-    @switch_decorator
-    def add_rg_line(self, line_func):
-        ax = self._ax
-        x = np.linspace(0, 300)
-        y = line_func(x)
-        ax.plot(x, y)
-
-    @switch_decorator
-    def add_rs(self, rs, rs_x, rs_y):
-        ax = self._ax
-        ax.add_artist(plt.Circle((rs_x, rs_y), rs, fill=False))
-
-    @switch_decorator
-    def add_rc(self, rc, rc_x, rc_y):
-        ax = self._ax
-        ax.add_artist(plt.Circle((rc_x, rc_y), rc, fill=False))
-
-    # 增加暴露弧范围
-    @switch_decorator
-    def add_expose_area(
-        self,
-        rc_x,
-        rc_y,
-        intersection_x1,
-        intersection_y1,
-        intersection_x2,
-        intersection_y2,
-    ):
-        ax = self._ax
-        ax.plot([rc_x, intersection_x1], [rc_y, intersection_y1], color="red")
-        ax.plot([rc_x, intersection_x2], [rc_y, intersection_y2], color="red")
-        pass
-
-    @switch_decorator
-    def clear(self):
-        ax = self._ax
-        ax.cla()
-
-    @switch_decorator
-    def pause(self):
-        ax = self._ax
-        self._ticks += 1
-        ticks = self._ticks
-        ax.set_title(f"{ticks}")
-        plt.pause(0.02)
-        self.clear()
-        self.init_fig()
-
-    pass

core.py

@@ -2,7 +2,7 @@ import math
 import ezdxf
 import numpy as np
 from typing import List
-
+from loguru import logger
 gCAD = None
 gMSP = None
 gCount = 1
@@ -26,6 +26,9 @@ class Parameter:
     Ip_a: float  # 概率密度曲线系数a
     Ip_b: float  # 概率密度曲线系数b
     ac_or_dc: str  # 交流或直流标识，"AC" 或 "DC"，默认 "AC"
+    z_0: float  # 雷电波阻抗，默认 300
+    z_c: float  # 导线波阻抗，默认 251
+    u_50: float  # 50%击穿电压，-1表示自动计算
 
 
 def rg_line_function_factory(_rg, ground_angel):  # 返回一个地面捕雷线的直线方程
@@ -185,19 +188,20 @@ def solve_circle_line_intersection(
         return [_x, _y]
 
 
-def min_i(string_len, u_ph, altitude: float = 0):
+def min_i(string_len, u_ph, altitude: float = 0, z_0: float = 300, z_c: float = 251, u_50: float = None):
     # 海拔修正
     if altitude > 1000:
         k_a = math.exp((altitude - 1000) / 8150)  # 气隙海拔修正
     else:
         k_a = 1
-    u_50 = 1 / k_a * (530 * string_len + 35)  # 50045 上附录的公式，实际应该用负极性电压的公式
+    # 只有在u_50未提供时才使用公式计算
+    if u_50 is None:
+        u_50 = 1 / k_a * (530 * string_len + 35)  # 50045 上附录的公式，实际应该用负极性电压的公式
+    logger.info(f"50%击穿电压为: {u_50}kV")
     # u_50 = 1 / k_a * (533 * string_len + 132)  # 串放电路径 1000m海拔
     # u_50 = 1 / k_a * (477 * string_len + 99)  # 串放电路径 2000m海拔
     # u_50 = 615 * string_len  # 导线对塔身放电 1000m海拔
     # u_50= 263.32647401+533.90081562*string_len
-    z_0 = 300  # 雷电波阻抗
-    z_c = 251  # 导线波阻抗
     # 新版大手册公式 3-277
     r = (u_50 + 2 * z_0 / (2 * z_0 + z_c) * u_ph) * (2 * z_0 + z_c) / (z_0 * z_c)
     # r = 2 * (u_50 - u_ph) / z_c

main-batch.py

@@ -1,7 +1,7 @@
 import math
 import os.path
 import sys
-import tomli
+import tomllib as tomli
 from loguru import logger
 from core import *
 import timeit
@@ -49,10 +49,13 @@ def read_parameter(toml_file_path) -> Parameter:
         para.h_arm = toml_parameter["h_arm"]
         para.altitude = toml_parameter["altitude"]
         para.rated_voltage = toml_parameter["rated_voltage"]
+        para.z_0 = toml_parameter.get("z_0", 300)  # 雷电波阻抗
+        para.z_c = toml_parameter.get("z_c", 251)  # 导线波阻抗
         toml_advance = toml_dict["advance"]
         para.ng = toml_advance["ng"]  # 地闪密度
         para.Ip_a = toml_advance["Ip_a"]  # 概率密度曲线系数a
         para.Ip_b = toml_advance["Ip_b"]  # 概率密度曲线系数b
+        para.u_50 = toml_advance.get("u_50", -1)  # 50%击穿电压，-1表示自动计算
         toml_optional = toml_dict["optional"]
         para.voltage_n = toml_optional["voltage_n"]  # 工作电压分成多少份来计算
         para.max_i = toml_optional["max_i"]
@@ -152,7 +155,9 @@ def egm():
                         i_max = 0
                         insulator_c_len = para.insulator_c_len
                         # i_min = min_i(insulator_c_len, u_ph / 1.732)
-                        i_min = min_i(insulator_c_len, u_ph, para.altitude)
+                        # u_50: -1表示自动计算，其他值表示使用提供的值
+                        u_50_value = para.u_50 if para.u_50 > 0 else None
+                        i_min = min_i(insulator_c_len, u_ph, para.altitude, para.z_0, para.z_c, u_50_value)
                         _min_i = i_min  # 尝试的最小电流
                         _max_i = para.max_i  # 尝试的最大电流
                         # cad.draw(i_min, u_ph, rs_x, rs_y, rc_x, rc_y, rg_x, rg_y, rg_type, 2)

main.py

@@ -2,16 +2,16 @@ import math
 import os.path
 import sys
 import time
-import tomli
+import tomllib as tomli
 from loguru import logger
 from core import *
 import timeit
-from animation import Animation
 
 
 # 打印参数
 def parameter_display(para_dis: Parameter):
     logger.info(f"额定电压 kV {para_dis.rated_voltage}")
+    logger.info(f"交、直流标识 {para_dis.ac_or_dc}")
     logger.info(f"导线弧垂 m {para_dis.h_c_sag}")
     logger.info(f"地线弧垂 m {para_dis.h_g_sag}")
     logger.info(f"全塔高 m {para_dis.h_arm[0]}")
@@ -22,14 +22,18 @@ def parameter_display(para_dis: Parameter):
     logger.info(f"挂点水平坐标 m {para_dis.gc_x}")
     logger.info(f"地面倾角 ° {[an * 180 / math.pi for an in para_dis.ground_angels]}")
     logger.info(f"海拔高度 m {para_dis.altitude}")
-    if para_dis.ng > 0:
+    logger.info(f"雷电波阻抗 Ω {para_dis.z_0}")
-        logger.info("不采用雷暴日计算地闪密度和雷电流密度")
+    logger.info(f"导线波阻抗 Ω {para_dis.z_c}")
-        logger.info(f"地闪密度 次/(每平方公里·每年) {para_dis.ng}")
+    logger.info(f"工作电压分份数 {para_dis.voltage_n}")
-        logger.info(f"概率密度曲线系数a {para_dis.Ip_a}")
+    logger.info(f"最大尝试电流 kA {para_dis.max_i}")
-        logger.info(f"概率密度曲线系数b {para_dis.Ip_b}")
+    # if para_dis.ng > 0:
-        pass
+        # logger.info("不采用雷暴日计算地闪密度和雷电流密度")
-    else:
+    logger.info(f"地闪密度 次/(每平方公里·每年) {para_dis.ng}")
-        logger.info(f"雷暴日 d {para_dis.td}")
+    logger.info(f"概率密度曲线系数a {para_dis.Ip_a}")
+    logger.info(f"概率密度曲线系数b {para_dis.Ip_b}")
+    # pass
+    # else:
+    logger.info(f"雷暴日 d {para_dis.td}")
 
 
 def read_parameter(toml_file_path) -> Parameter:
@@ -52,21 +56,25 @@ def read_parameter(toml_file_path) -> Parameter:
         para.altitude = toml_parameter["altitude"]
         para.rated_voltage = toml_parameter["rated_voltage"]
         para.ac_or_dc = toml_parameter.get("ac_or_dc", "AC")  # 交流或直流标识，默认AC
+        para.z_0 = toml_parameter.get("z_0", 300)  # 雷电波阻抗
+        para.z_c = toml_parameter.get("z_c", 251)  # 导线波阻抗
         toml_advance = toml_dict["advance"]
         para.ng = toml_advance["ng"]  # 地闪密度
         para.Ip_a = toml_advance["Ip_a"]  # 概率密度曲线系数a
         para.Ip_b = toml_advance["Ip_b"]  # 概率密度曲线系数b
+        para.u_50 = toml_advance.get("u_50", -1)  # 50%击穿电压，-1表示自动计算
         toml_optional = toml_dict["optional"]
         para.voltage_n = toml_optional["voltage_n"]  # 工作电压分成多少份来计算
         para.max_i = toml_optional["max_i"]
     return para
 
 
-def run_egm(para: Parameter) -> dict:
+def run_egm(para: Parameter, animation=None) -> dict:
     """
     执行 EGM 计算的核心函数，可被外部调用。
     Args:
         para: 参数对象，包含所有计算所需的参数。
+        animation: 可选的动画对象，用于可视化。需要实现 add_rs, add_rc, add_rg_line, add_expose_area, pause 方法。
     Returns:
         计算结果字典。
     """
@@ -104,9 +112,9 @@ def run_egm(para: Parameter) -> dict:
     ng = func_ng(td, para.ng)
     avr_n_sf = 0  # 考虑电压的影响计算的跳闸率
     ground_angels = para.ground_angels
-    # 初始化动画
+    # 动画对象：如果传入了 animation 则使用，否则不启用动画
-    animate = Animation()
+    # 注意：动画的启用由前端用户通过"启用动画"开关控制，后端不主动启用
-    animate.enable(False)
+    animate = animation
     # animate.show()
     for ground_angel in ground_angels:
         logger.info(f"地面倾角{ground_angel/math.pi*180:.3f}°")
@@ -137,31 +145,26 @@ def run_egm(para: Parameter) -> dict:
                     rg_y = gc_y[phase_conductor_foo + 2]
                 else:
                     rg_type = "g"
-            # TODO 保护角公式可能有问题，后面改
+            # 使用实际高度（考虑弧垂）计算保护角
             shield_angle_at_avg_height = (
-                math.atan(
+                math.atan2(rc_x - rs_x, rs_y - rc_y)
-                    (rc_x - rs_x)
-                    / (
-                        (h_arm[0] - string_g_len - h_arm[phase_conductor_foo + 1])
-                        + string_c_len
-                    )
-                )
                 * 180
                 / math.pi
-            )  # 挂点处保护角
+            )
-            logger.info(f"挂点处保护角{shield_angle_at_avg_height:.3f}°")
+            logger.info(f"地线保护角（平均高处）{shield_angle_at_avg_height:.2f}°")
             logger.debug(f"最低相防护标识{rg_type}。（g表示地面，c表示下导线）")
             rated_voltage = para.rated_voltage
             logger.info(f"交、直流标识{para.ac_or_dc}")
             for u_bar in range(voltage_n):  # 计算不同工作电压下的跳闸率
                 if para.ac_or_dc=="AC":
                     # TODO 需要区分交、直流
-                    u_ph = (
+                    # u_ph = (
-                        math.sqrt(2)
+                    #     math.sqrt(2)
-                        * rated_voltage
+                    #     * rated_voltage
-                        * math.cos(2 * math.pi / voltage_n * u_bar)
+                    #     * math.cos(2 * math.pi / voltage_n * u_bar)
-                        / 1.732
+                    #     / 1.732
-                    )  # 运行相电压
+                    # )  # 运行相电压
+                    u_ph = rated_voltage/1.732
                 else:
                     u_ph = rated_voltage
                 logger.info(f"计算第{phase_conductor_foo + 1}相，电压为{u_ph:.2f}kV")
@@ -170,7 +173,9 @@ def run_egm(para: Parameter) -> dict:
                 insulator_c_len = para.insulator_c_len
                 # i_min = min_i(insulator_c_len, u_ph / 1.732)
                 # TODO 需要考虑交、直流
-                i_min = min_i(insulator_c_len, u_ph, para.altitude)
+                # u_50: -1表示自动计算，其他值表示使用提供的值
+                u_50_value = para.u_50 if para.u_50 > 0 else None
+                i_min = min_i(insulator_c_len, u_ph, para.altitude, para.z_0, para.z_c, u_50_value)
                 _min_i = i_min  # 尝试的最小电流
                 _max_i = para.max_i  # 尝试的最大电流
                 # cad.draw(i_min, u_ph, rs_x, rs_y, rc_x, rc_y, rg_x, rg_y, rg_type, 2)
@@ -179,14 +184,17 @@ def run_egm(para: Parameter) -> dict:
                 ):  # 雷电流
                     logger.info(f"尝试计算电流为{i_bar:.2f}")
                     rs = rs_fun(i_bar)
-                    animate.add_rs(rs, rs_x, rs_y)
+                    if animate:
+                        animate.add_rs(rs, rs_x, rs_y)
                     rc = rc_fun(i_bar, u_ph)
-                    animate.add_rc(rc, rc_x, rc_y)
+                    if animate:
+                        animate.add_rc(rc, rc_x, rc_y)
                     rg = rg_fun(i_bar, rc_y, u_ph, typ=rg_type)
                     rg_line_func = None
                     if rg_type == "g":
                         rg_line_func = rg_line_function_factory(rg, ground_angel)
-                        animate.add_rg_line(rg_line_func)
+                        if animate:
+                            animate.add_rg_line(rg_line_func)
                     rs_rc_circle_intersection = solve_circle_intersection(
                         rs, rc, rs_x, rs_y, rc_x, rc_y
                     )
@@ -219,12 +227,13 @@ def run_egm(para: Parameter) -> dict:
                                 "上面的导地线无法保护下面的导地线，检查设置参数。"
                             )
                             continue
-                    animate.add_expose_area(
+                    if animate:
-                        rc_x,
+                        animate.add_expose_area(
-                        rc_y,
+                            rc_x,
-                        *rs_rc_circle_intersection,
+                            rc_y,
-                        *circle_rc_or_rg_line_intersection,
+                            *rs_rc_circle_intersection,
-                    )
+                            *circle_rc_or_rg_line_intersection,
+                        )
                     cad = Draw()
                     cad.draw(
                         i_min,
@@ -252,7 +261,8 @@ def run_egm(para: Parameter) -> dict:
                         ground_angel,
                         6,
                     )  # 最大电流时
-                    cad.save_as(f"egm{phase_conductor_foo + 1}.dxf")
+                    # TODO: 暂时先不用。
+                    # cad.save_as(f"egm{phase_conductor_foo + 1}.dxf")
                     min_distance_intersection = (
                         np.sum(
                             (
@@ -298,7 +308,8 @@ def run_egm(para: Parameter) -> dict:
                             logger.info(f"电流为{i_bar}kA时，暴露弧已经完全被屏蔽")
                             exposed_curve_shielded = True
                             break
-                    animate.pause()
+                    if animate:
+                        animate.pause()
                 # 判断是否导线已经被完全保护
                 if abs(i_max - _max_i) < 1e-5:
                     logger.info("无法找到最大电流，可能是杆塔较高。")

package-lock.json

@@ -0,0 +1,6 @@
+{
+  "name": "EGM",
+  "lockfileVersion": 3,
+  "requires": true,
+  "packages": {}
+}

plot.py

@@ -1,100 +0,0 @@
-import matplotlib
-from plot_data import *
-import matplotlib.pyplot as plt
-import matplotlib.ticker as mticker
-
-matplotlib.use("Qt5Agg")
-# 解决中文乱码
-plt.rcParams["font.sans-serif"] = ["simsun"]
-plt.rcParams["font.family"] = "sans-serif"
-# plt.rcParams["font.weight"] = "bold"
-# 解决负号无法显示的问题
-plt.rcParams["axes.unicode_minus"] = False
-plt.rcParams["savefig.dpi"] = 1200  # 图片像素
-# plt.savefig("port.png", dpi=600, bbox_inches="tight")
-fontsize = 12
-################################################
-witdh_of_bar=0.3
-color=plt.cm.BuPu(np.linspace(152/255, 251/255,152/255))
-percent1 = data_150m塔高_不同地线保护角[:, 1] / data_150m塔高_不同地线保护角[:, 0]
-# percent1 = data_66m串长_不同塔高[:, 1] / data_66m串长_不同塔高[:, 0]
-# percent2 = data_68m串长_不同塔高[:, 1] / data_68m串长_不同塔高[:, 0]
-fig, ax = plt.subplots()
-x = np.arange(len(category_names_150m塔高_不同地线保护角))  # the label locations
-p1 = ax.bar(category_names_150m塔高_不同地线保护角, percent1, witdh_of_bar, label="绕击/反击跳闸率比值",color=color,hatch='-')
-# p1 = ax.bar(x - 0.3 / 2, percent1, 0.3, label="6.6m绝缘距离")
-# p2 = ax.bar(x + 0.3 / 2, percent2, 0.3, label="6.8m绝缘距离")
-ax.xaxis.set_major_locator(mticker.FixedLocator(x))
-ax.set_xticklabels(category_names_150m塔高_不同地线保护角)
-ax.set_ylabel("比值", fontsize=fontsize)
-ax.set_xlabel("地线保护角(°)", fontsize=fontsize)
-# ax.set_xlabel("接地电阻(Ω)", fontsize=fontsize)
-plt.xticks(fontsize=fontsize)
-plt.yticks(fontsize=fontsize)
-ax.bar_label(p1, padding=0, fontsize=fontsize)
-# ax.bar_label(p2, padding=0, fontsize=fontsize)
-ax.legend(fontsize=fontsize)
-
-fig.tight_layout()
-plt.show()
-
-
-# results = {
-#     "100m": 100 * data[0, :] / np.sum(data[0, :]),
-#     "110m": data[1, :] / np.sum(data[1, :]),
-#     "120m": data[2, :] / np.sum(data[2, :]),
-#     "130m": data[3, :] / np.sum(data[3, :]),
-#     "140m": data[4, :] / np.sum(data[4, :]),
-#     "150m": data[5, :] / np.sum(data[5, :]),
-# }
-
-
-# def survey(results, category_names):
-#     """
-#     Parameters
-#     ----------
-#     results : dict
-#         A mapping from question labels to a list of answers per category.
-#         It is assumed all lists contain the same number of entries and that
-#         it matches the length of *category_names*.
-#     category_names : list of str
-#         The category labels.
-#     """
-#     labels = list(results.keys())
-#     data = np.array(list(results.values()))
-#     data_cum = data.cumsum(axis=1)
-#     category_colors = plt.get_cmap("RdYlGn")(np.linspace(0.15, 0.85, data.shape[1]))
-#
-#     fig, ax = plt.subplots(figsize=(9.2, 5))
-#     ax.invert_yaxis()
-#     ax.xaxis.set_visible(False)
-#     ax.set_xlim(0, np.sum(data, axis=1).max())
-#
-#     for i, (colname, color) in enumerate(zip(category_names, category_colors)):
-#         widths = data[:, i]
-#         starts = data_cum[:, i] - widths
-#         rects = ax.barh(
-#             labels, widths, left=starts, height=0.5, label=colname, color=color
-#         )
-#
-#         r, g, b, _ = color
-#         text_color = "white" if r * g * b < 0.5 else "darkgrey"
-#         ax.bar_label(rects, label_type="center", color=text_color)
-#     ax.legend(
-#         ncol=len(category_names),
-#         bbox_to_anchor=(0, 1),
-#         loc="lower left",
-#         fontsize="small",
-#     )
-#
-#     return fig, ax
-
-# percent=data/np.sum(data,axis=1)[:,None]*100
-# percent = data[:, 1] / data[:, 0]
-# plt.bar(category_names, percent, 0.3, label="黑")
-# # plt.bar(category_names, percent[:,0], 0.2, label="r")
-#
-# # plt.bar(category_names, [0.014094 / 100, 0.025094 / 100], 0.2, label="h")
-# plt.legend()
-# # survey(results, category_names)
-# plt.show()

update_version.py

@@ -0,0 +1,58 @@
+#!/usr/bin/env python3
+"""更新版本号脚本"""
+import sys
+from pathlib import Path
+
+
+def get_version():
+    """从 VERSION 文件读取版本号"""
+    version_file = Path(__file__).parent / "VERSION"
+    return version_file.read_text().strip()
+
+
+def increment_version(version: str) -> str:
+    """递增版本号的修订号"""
+    parts = version.split(".")
+    if len(parts) == 3:
+        parts[2] = str(int(parts[2]) + 1)
+        return ".".join(parts)
+    return version
+
+
+def update_version_file(version: str):
+    """更新 VERSION 文件"""
+    version_file = Path(__file__).parent / "VERSION"
+    version_file.write_text(version + "\n")
+
+
+def create_metadata(version: str):
+    """创建 metadata.yml 文件"""
+    metadata_file = Path(__file__).parent / "metadata.yml"
+    content = f"""version: {version}
+company_name: EGM
+file_description: EGM Lightning Protection Calculator
+product_name: Lightening
+"""
+    metadata_file.write_text(content)
+    print(f"Created metadata.yml with version {version}")
+
+
+def main():
+    # 检查是否只获取版本号
+    if len(sys.argv) > 1 and sys.argv[1] == "--get":
+        print(get_version())
+        return
+    
+    # 获取当前版本并递增
+    current_version = get_version()
+    new_version = increment_version(current_version)
+    
+    # 更新所有文件
+    update_version_file(new_version)
+    create_metadata(new_version)
+    
+    print(f"Version updated: {current_version} -> {new_version}")
+
+
+if __name__ == "__main__":
+    main()

webui/package-lock.json

@@ -21,7 +21,7 @@
         "tailwindcss": "^3.4.0",
         "typescript": "^5.3.0",
         "vite": "^5.0.0",
-        "vue-tsc": "^1.8.0"
+        "vue-tsc": "^2.0.0"
       }
     },
     "node_modules/@alloc/quick-lru": {
@@ -1218,34 +1218,32 @@
       }
     },
     "node_modules/@volar/language-core": {
-      "version": "1.11.1",
+      "version": "2.4.15",
-      "resolved": "https://registry.npmmirror.com/@volar/language-core/-/language-core-1.11.1.tgz",
+      "resolved": "https://registry.npmmirror.com/@volar/language-core/-/language-core-2.4.15.tgz",
-      "integrity": "sha512-dOcNn3i9GgZAcJt43wuaEykSluAuOkQgzni1cuxLxTV0nJKanQztp7FxyswdRILaKH+P2XZMPRp2S4MV/pElCw==",
+      "integrity": "sha512-3VHw+QZU0ZG9IuQmzT68IyN4hZNd9GchGPhbD9+pa8CVv7rnoOZwo7T8weIbrRmihqy3ATpdfXFnqRrfPVK6CA==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@volar/source-map": "1.11.1"
+        "@volar/source-map": "2.4.15"
       }
     },
     "node_modules/@volar/source-map": {
-      "version": "1.11.1",
+      "version": "2.4.15",
-      "resolved": "https://registry.npmmirror.com/@volar/source-map/-/source-map-1.11.1.tgz",
+      "resolved": "https://registry.npmmirror.com/@volar/source-map/-/source-map-2.4.15.tgz",
-      "integrity": "sha512-hJnOnwZ4+WT5iupLRnuzbULZ42L7BWWPMmruzwtLhJfpDVoZLjNBxHDi2sY2bgZXCKlpU5XcsMFoYrsQmPhfZg==",
+      "integrity": "sha512-CPbMWlUN6hVZJYGcU/GSoHu4EnCHiLaXI9n8c9la6RaI9W5JHX+NqG+GSQcB0JdC2FIBLdZJwGsfKyBB71VlTg==",
       "dev": true,
-      "license": "MIT",
+      "license": "MIT"
-      "dependencies": {
-        "muggle-string": "^0.3.1"
-      }
     },
     "node_modules/@volar/typescript": {
-      "version": "1.11.1",
+      "version": "2.4.15",
-      "resolved": "https://registry.npmmirror.com/@volar/typescript/-/typescript-1.11.1.tgz",
+      "resolved": "https://registry.npmmirror.com/@volar/typescript/-/typescript-2.4.15.tgz",
-      "integrity": "sha512-iU+t2mas/4lYierSnoFOeRFQUhAEMgsFuQxoxvwn5EdQopw43j+J27a4lt9LMInx1gLJBC6qL14WYGlgymaSMQ==",
+      "integrity": "sha512-2aZ8i0cqPGjXb4BhkMsPYDkkuc2ZQ6yOpqwAuNwUoncELqoy5fRgOQtLR9gB0g902iS0NAkvpIzs27geVyVdPg==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@volar/language-core": "1.11.1",
+        "@volar/language-core": "2.4.15",
-        "path-browserify": "^1.0.1"
+        "path-browserify": "^1.0.1",
+        "vscode-uri": "^3.0.8"
       }
     },
     "node_modules/@vue/compiler-core": {
@@ -1298,22 +1296,32 @@
         "@vue/shared": "3.5.29"
       }
     },
-    "node_modules/@vue/language-core": {
+    "node_modules/@vue/compiler-vue2": {
-      "version": "1.8.27",
+      "version": "2.7.16",
-      "resolved": "https://registry.npmmirror.com/@vue/language-core/-/language-core-1.8.27.tgz",
+      "resolved": "https://registry.npmmirror.com/@vue/compiler-vue2/-/compiler-vue2-2.7.16.tgz",
-      "integrity": "sha512-L8Kc27VdQserNaCUNiSFdDl9LWT24ly8Hpwf1ECy3aFb9m6bDhBGQYOujDm21N7EW3moKIOKEanQwe1q5BK+mA==",
+      "integrity": "sha512-qYC3Psj9S/mfu9uVi5WvNZIzq+xnXMhOwbTFKKDD7b1lhpnn71jXSFdTQ+WsIEk0ONCd7VV2IMm7ONl6tbQ86A==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@volar/language-core": "~1.11.1",
+        "de-indent": "^1.0.2",
-        "@volar/source-map": "~1.11.1",
+        "he": "^1.2.0"
-        "@vue/compiler-dom": "^3.3.0",
+      }
-        "@vue/shared": "^3.3.0",
+    },
-        "computeds": "^0.0.1",
+    "node_modules/@vue/language-core": {
+      "version": "2.2.12",
+      "resolved": "https://registry.npmmirror.com/@vue/language-core/-/language-core-2.2.12.tgz",
+      "integrity": "sha512-IsGljWbKGU1MZpBPN+BvPAdr55YPkj2nB/TBNGNC32Vy2qLG25DYu/NBN2vNtZqdRbTRjaoYrahLrToim2NanA==",
+      "dev": true,
+      "license": "MIT",
+      "dependencies": {
+        "@volar/language-core": "2.4.15",
+        "@vue/compiler-dom": "^3.5.0",
+        "@vue/compiler-vue2": "^2.7.16",
+        "@vue/shared": "^3.5.0",
+        "alien-signals": "^1.0.3",
         "minimatch": "^9.0.3",
-        "muggle-string": "^0.3.1",
+        "muggle-string": "^0.4.1",
-        "path-browserify": "^1.0.1",
+        "path-browserify": "^1.0.1"
-        "vue-template-compiler": "^2.7.14"
       },
       "peerDependencies": {
         "typescript": "*"
@@ -1374,6 +1382,13 @@
       "integrity": "sha512-w7SR0A5zyRByL9XUkCfdLs7t9XOHUyJ67qPGQjOou3p6GvBeBW+AVjUUmlxtZ4PIYaRvE+1LmK44O4uajlZwcg==",
       "license": "MIT"
     },
+    "node_modules/alien-signals": {
+      "version": "1.0.13",
+      "resolved": "https://registry.npmmirror.com/alien-signals/-/alien-signals-1.0.13.tgz",
+      "integrity": "sha512-OGj9yyTnJEttvzhTUWuscOvtqxq5vrhF7vL9oS0xJ2mK0ItPYP1/y+vCFebfxoEyAz0++1AIwJ5CMr+Fk3nDmg==",
+      "dev": true,
+      "license": "MIT"
+    },
     "node_modules/any-promise": {
       "version": "1.3.0",
       "resolved": "https://registry.npmmirror.com/any-promise/-/any-promise-1.3.0.tgz",
@@ -1616,13 +1631,6 @@
         "node": ">= 6"
       }
     },
-    "node_modules/computeds": {
-      "version": "0.0.1",
-      "resolved": "https://registry.npmmirror.com/computeds/-/computeds-0.0.1.tgz",
-      "integrity": "sha512-7CEBgcMjVmitjYo5q8JTJVra6X5mQ20uTThdK+0kR7UEaDrAWEQcRiBtWJzga4eRpP6afNwwLsX2SET2JhVB1Q==",
-      "dev": true,
-      "license": "MIT"
-    },
     "node_modules/cssesc": {
       "version": "3.0.0",
       "resolved": "https://registry.npmmirror.com/cssesc/-/cssesc-3.0.0.tgz",
@@ -2033,9 +2041,9 @@
       }
     },
     "node_modules/muggle-string": {
-      "version": "0.3.1",
+      "version": "0.4.1",
-      "resolved": "https://registry.npmmirror.com/muggle-string/-/muggle-string-0.3.1.tgz",
+      "resolved": "https://registry.npmmirror.com/muggle-string/-/muggle-string-0.4.1.tgz",
-      "integrity": "sha512-ckmWDJjphvd/FvZawgygcUeQCxzvohjFO5RxTjj4eq8kw359gFF3E1brjfI+viLMxss5JrHTDRHZvu2/tuy0Qg==",
+      "integrity": "sha512-VNTrAak/KhO2i8dqqnqnAHOa3cYBwXEZe9h+D5h/1ZqFSTEFHdM65lR7RoIqq3tBBYavsOXV84NoHXZ0AkPyqQ==",
       "dev": true,
       "license": "MIT"
     },
@@ -2881,19 +2889,6 @@
         "url": "https://paulmillr.com/funding/"
       }
     },
-    "node_modules/semver": {
-      "version": "7.7.4",
-      "resolved": "https://registry.npmmirror.com/semver/-/semver-7.7.4.tgz",
-      "integrity": "sha512-vFKC2IEtQnVhpT78h1Yp8wzwrf8CM+MzKMHGJZfBtzhZNycRFnXsHk6E5TxIkkMsgNS7mdX3AGB7x2QM2di4lA==",
-      "dev": true,
-      "license": "ISC",
-      "bin": {
-        "semver": "bin/semver.js"
-      },
-      "engines": {
-        "node": ">=10"
-      }
-    },
     "node_modules/source-map-js": {
       "version": "1.2.1",
       "resolved": "https://registry.npmmirror.com/source-map-js/-/source-map-js-1.2.1.tgz",
@@ -3235,6 +3230,13 @@
         }
       }
     },
+    "node_modules/vscode-uri": {
+      "version": "3.1.0",
+      "resolved": "https://registry.npmmirror.com/vscode-uri/-/vscode-uri-3.1.0.tgz",
+      "integrity": "sha512-/BpdSx+yCQGnCvecbyXdxHDkuk55/G3xwnC0GqY4gmQ3j+A+g8kzzgB4Nk/SINjqn6+waqw3EgbVF2QKExkRxQ==",
+      "dev": true,
+      "license": "MIT"
+    },
     "node_modules/vue": {
       "version": "3.5.29",
       "resolved": "https://registry.npmmirror.com/vue/-/vue-3.5.29.tgz",
@@ -3257,33 +3259,21 @@
         }
       }
     },
-    "node_modules/vue-template-compiler": {
-      "version": "2.7.16",
-      "resolved": "https://registry.npmmirror.com/vue-template-compiler/-/vue-template-compiler-2.7.16.tgz",
-      "integrity": "sha512-AYbUWAJHLGGQM7+cNTELw+KsOG9nl2CnSv467WobS5Cv9uk3wFcnr1Etsz2sEIHEZvw1U+o9mRlEO6QbZvUPGQ==",
-      "dev": true,
-      "license": "MIT",
-      "dependencies": {
-        "de-indent": "^1.0.2",
-        "he": "^1.2.0"
-      }
-    },
     "node_modules/vue-tsc": {
-      "version": "1.8.27",
+      "version": "2.2.12",
-      "resolved": "https://registry.npmmirror.com/vue-tsc/-/vue-tsc-1.8.27.tgz",
+      "resolved": "https://registry.npmmirror.com/vue-tsc/-/vue-tsc-2.2.12.tgz",
-      "integrity": "sha512-WesKCAZCRAbmmhuGl3+VrdWItEvfoFIPXOvUJkjULi+x+6G/Dy69yO3TBRJDr9eUlmsNAwVmxsNZxvHKzbkKdg==",
+      "integrity": "sha512-P7OP77b2h/Pmk+lZdJ0YWs+5tJ6J2+uOQPo7tlBnY44QqQSPYvS0qVT4wqDJgwrZaLe47etJLLQRFia71GYITw==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@volar/typescript": "~1.11.1",
+        "@volar/typescript": "2.4.15",
-        "@vue/language-core": "1.8.27",
+        "@vue/language-core": "2.2.12"
-        "semver": "^7.5.4"
       },
       "bin": {
         "vue-tsc": "bin/vue-tsc.js"
       },
       "peerDependencies": {
-        "typescript": "*"
+        "typescript": ">=5.0.0"
       }
     }
   }

webui/package.json

@@ -1 +1 @@
-{"name":"egm-webui","version":"0.1.0","type":"module","scripts":{"dev":"vite","build":"vue-tsc && vite build","preview":"vite preview"},"dependencies":{"@quasar/extras":"^1.17.0","@quasar/vite-plugin":"^1.10.0","quasar":"^2.14.0","vue":"^3.4.0"},"devDependencies":{"@vitejs/plugin-vue":"^5.0.0","autoprefixer":"^10.4.0","postcss":"^8.4.0","sass-embedded":"^1.97.3","tailwindcss":"^3.4.0","typescript":"^5.3.0","vite":"^5.0.0","vue-tsc":"^1.8.0"}}
+{"name":"egm-webui","version":"0.1.0","type":"module","scripts":{"dev":"vite","build":"vue-tsc && vite build","preview":"vite preview"},"dependencies":{"@quasar/extras":"^1.17.0","@quasar/vite-plugin":"^1.10.0","quasar":"^2.14.0","vue":"^3.4.0"},"devDependencies":{"@vitejs/plugin-vue":"^5.0.0","autoprefixer":"^10.4.0","postcss":"^8.4.0","sass-embedded":"^1.97.3","tailwindcss":"^3.4.0","typescript":"^5.3.0","vite":"^5.0.0","vue-tsc":"^2.0.0"}}

webui/src/App.vue

@@ -1,7 +1,26 @@
 <template>
-  <ParameterForm />
+  <div class="app-container">
+    <ParameterForm />
+    <div class="version-footer">v{{ appVersion }}</div>
+  </div>
 </template>
 
 <script setup lang="ts">
 import ParameterForm from '@/components/ParameterForm.vue'
+
+const appVersion = __APP_VERSION__
 </script>
+
+<style scoped>
+.app-container {
+  min-height: 100vh;
+  display: flex;
+  flex-direction: column;
+}
+.version-footer {
+  text-align: center;
+  padding: 8px;
+  color: #999;
+  font-size: 12px;
+}
+</style>

webui/src/components/Animation.vue

@@ -0,0 +1,257 @@
+<template>
+  <q-card class="shadow-2">
+    <q-card-section class="bg-indigo-50 cursor-pointer" @click="toggleExpand">
+      <div class="text-h6 text-indigo-900 flex items-center gap-2">
+        <q-icon name="animation" />
+        EGM 动画可视化
+        <q-space />
+        <q-icon :name="expanded ? 'expand_less' : 'expand_more'" />
+      </div>
+    </q-card-section>
+
+    <q-slide-transition>
+      <q-card-section v-show="expanded">
+        <canvas
+          ref="canvasRef"
+          :width="canvasWidth"
+          :height="canvasHeight"
+          class="animation-canvas"
+        />
+      </q-card-section>
+    </q-slide-transition>
+  </q-card>
+</template>
+
+<script setup lang="ts">
+import { ref, onMounted, onUnmounted } from 'vue'
+
+// Canvas 尺寸
+const canvasWidth = 600
+const canvasHeight = 600
+
+// 坐标范围（对应 animation.py 的 [-500, 500]）
+const coordRange = {
+  xMin: -500,
+  xMax: 500,
+  yMin: -500,
+  yMax: 500
+}
+
+// 展开/折叠状态
+const expanded = ref(false)
+const canvasRef = ref<HTMLCanvasElement | null>(null)
+let ctx: CanvasRenderingContext2D | null = null
+let tick = 0
+
+// 切换展开/折叠
+const toggleExpand = () => {
+  expanded.value = !expanded.value
+  if (expanded.value) {
+    // 展开时初始化画布
+    setTimeout(() => {
+      if (canvasRef.value) {
+        ctx = canvasRef.value.getContext('2d')
+        initFig()
+      }
+    }, 350) // 等待动画完成
+  }
+}
+
+// 坐标转换：数据坐标 -> Canvas 坐标
+const toCanvasX = (x: number): number => {
+  return ((x - coordRange.xMin) / (coordRange.xMax - coordRange.xMin)) * canvasWidth
+}
+
+const toCanvasY = (y: number): number => {
+  // Canvas Y 轴向下，需要反转
+  return canvasHeight - ((y - coordRange.yMin) / (coordRange.yMax - coordRange.yMin)) * canvasHeight
+}
+
+// 初始化画布
+const initFig = () => {
+  if (!ctx || !expanded.value) return
+
+  ctx.fillStyle = '#ffffff'
+  ctx.fillRect(0, 0, canvasWidth, canvasHeight)
+
+  // 绘制坐标轴
+  ctx.strokeStyle = '#e0e0e0'
+  ctx.lineWidth = 1
+
+  // X 轴
+  ctx.beginPath()
+  ctx.moveTo(0, toCanvasY(0))
+  ctx.lineTo(canvasWidth, toCanvasY(0))
+  ctx.stroke()
+
+  // Y 轴
+  ctx.beginPath()
+  ctx.moveTo(toCanvasX(0), 0)
+  ctx.lineTo(toCanvasX(0), canvasHeight)
+  ctx.stroke()
+
+  // 绘制刻度
+  ctx.fillStyle = '#666'
+  ctx.font = '10px Arial'
+  ctx.textAlign = 'center'
+
+  for (let x = coordRange.xMin; x <= coordRange.xMax; x += 100) {
+    if (x !== 0) {
+      const canvasX = toCanvasX(x)
+      ctx.fillText(x.toString(), canvasX, toCanvasY(0) + 15)
+    }
+  }
+
+  ctx.textAlign = 'right'
+  for (let y = coordRange.yMin; y <= coordRange.yMax; y += 100) {
+    if (y !== 0) {
+      const canvasY = toCanvasY(y)
+      ctx.fillText(y.toString(), toCanvasX(0) - 5, canvasY + 3)
+    }
+  }
+}
+
+// 清除画布
+const clear = () => {
+  if (!ctx) return
+  ctx.clearRect(0, 0, canvasWidth, canvasHeight)
+}
+
+// 添加 RG 线（地面线）
+const addRgLine = (points: [number, number][]) => {
+  if (!ctx || !expanded.value || !points || points.length === 0) return
+
+  ctx.strokeStyle = '#2196F3'
+  ctx.lineWidth = 2
+  ctx.beginPath()
+
+  points.forEach((point, index) => {
+    const canvasX = toCanvasX(point[0])
+    const canvasY = toCanvasY(point[1])
+    if (index === 0) {
+      ctx!.moveTo(canvasX, canvasY)
+    } else {
+      ctx!.lineTo(canvasX, canvasY)
+    }
+  })
+  ctx.stroke()
+}
+
+// 添加 RS 圆（地线保护弧）- 这是每帧第一个绘制的元素，先清除画布
+const addRs = (rs: number, rsX: number, rsY: number) => {
+  if (!ctx || !expanded.value) return
+
+  // 清除并重新初始化画布，准备绘制新的一帧
+  clear()
+  initFig()
+
+  const canvasX = toCanvasX(rsX)
+  const canvasY = toCanvasY(rsY)
+  const canvasRadius = rs * (canvasWidth / (coordRange.xMax - coordRange.xMin))
+
+  ctx.strokeStyle = '#4CAF50'
+  ctx.lineWidth = 2
+  ctx.beginPath()
+  ctx.arc(canvasX, canvasY, canvasRadius, 0, Math.PI * 2)
+  ctx.stroke()
+}
+
+// 添加 RC 圆（导线暴露弧）
+const addRc = (rc: number, rcX: number, rcY: number) => {
+  if (!ctx || !expanded.value) return
+
+  const canvasX = toCanvasX(rcX)
+  const canvasY = toCanvasY(rcY)
+  const canvasRadius = rc * (canvasWidth / (coordRange.xMax - coordRange.xMin))
+
+  ctx.strokeStyle = '#FF9800'
+  ctx.lineWidth = 2
+  ctx.beginPath()
+  ctx.arc(canvasX, canvasY, canvasRadius, 0, Math.PI * 2)
+  ctx.stroke()
+}
+
+// 添加暴露弧区域（两条红线）
+const addExposeArea = (
+  rcX: number,
+  rcY: number,
+  intersectionX1: number,
+  intersectionY1: number,
+  intersectionX2: number,
+  intersectionY2: number
+) => {
+  if (!ctx || !expanded.value) return
+
+  ctx.strokeStyle = '#F44336'
+  ctx.lineWidth = 3
+
+  // 第一条线
+  ctx.beginPath()
+  ctx.moveTo(toCanvasX(rcX), toCanvasY(rcY))
+  ctx.lineTo(toCanvasX(intersectionX1), toCanvasY(intersectionY1))
+  ctx.stroke()
+
+  // 第二条线
+  ctx.beginPath()
+  ctx.moveTo(toCanvasX(rcX), toCanvasY(rcY))
+  ctx.lineTo(toCanvasX(intersectionX2), toCanvasY(intersectionY2))
+  ctx.stroke()
+}
+
+// 暂停并刷新 - 用于下一帧绘制前清除
+const pause = () => {
+  if (!ctx || !expanded.value) return
+
+  tick += 1
+  // 不立即清除，等待下一次绑图时清除
+  // 这样用户可以看到当前帧
+}
+
+// 暴露方法给父组件或全局调用
+const animationApi = {
+  enable: (enable: boolean) => {
+    expanded.value = enable
+    if (enable && canvasRef.value) {
+      ctx = canvasRef.value.getContext('2d')
+      initFig()
+    }
+  },
+  isEnabled: () => expanded.value,
+  initFig,
+  clear,
+  addRgLine,
+  addRs,
+  addRc,
+  addExposeArea,
+  pause
+}
+
+// 注册到全局，供后端调用
+declare global {
+  interface Window {
+    animationApi?: typeof animationApi
+  }
+}
+
+onMounted(() => {
+  // 注册全局 API
+  window.animationApi = animationApi
+})
+
+onUnmounted(() => {
+  window.animationApi = undefined
+})
+
+// 导出方法供父组件使用
+defineExpose(animationApi)
+</script>
+
+<style scoped>
+.animation-canvas {
+  border: 1px solid #e0e0e0;
+  border-radius: 4px;
+  background: #fafafa;
+  display: block;
+  margin: 0 auto;
+}
+</style>

webui/src/components/Geometry.vue

@@ -0,0 +1,422 @@
+<template>
+  <q-card class="full-height">
+    <q-card-section class="bg-indigo-50">
+      <div class="text-h6 text-indigo-900 flex items-center gap-2">
+        <q-icon name="architecture" />
+        杆塔几何结构
+      </div>
+    </q-card-section>
+
+    <q-card-section>
+      <div class="geometry-container">
+          <canvas
+            ref="canvasRef"
+            :width="canvasWidth"
+            :height="canvasHeight"
+            class="geometry-canvas"
+          />
+          <!-- 图例 -->
+          <div class="legend q-mt-sm">
+            <div class="row q-gutter-md justify-center">
+              <div class="flex items-center gap-1">
+                <div class="legend-color" style="background: #4CAF50;"></div>
+                <span class="text-caption">地线</span>
+              </div>
+              <div class="flex items-center gap-1">
+                <div class="legend-color" style="background: #FF9800;"></div>
+                <span class="text-caption">导线</span>
+              </div>
+              <div class="flex items-center gap-1">
+                <div class="legend-color" style="background: #795548;"></div>
+                <span class="text-caption">地面</span>
+              </div>
+            </div>
+          </div>
+        </div>
+      </q-card-section>
+  </q-card>
+</template>
+
+<script setup lang="ts">
+import { ref, onMounted, watch } from 'vue'
+
+// Props
+const props = defineProps<{
+  hArm: number[]       // 导、地线挂点垂直坐标 [地线, 导线1, ...]
+  gcX: number[]        // 导、地线水平坐标 [地线, 导线1, ...]
+  hCSag: number        // 导线弧垂
+  hGSag: number        // 地线弧垂
+  stringCLen: number   // 导线串长
+  stringGLen: number   // 地线串长
+  groundAngels: number[] // 地面倾角
+}>()
+
+// Canvas 尺寸
+const canvasWidth = 600
+const canvasHeight = 500
+
+const canvasRef = ref<HTMLCanvasElement | null>(null)
+let ctx: CanvasRenderingContext2D | null = null
+
+// 计算参数
+const margin = { top: 40, right: 40, bottom: 60, left: 60 }
+const plotWidth = canvasWidth - margin.left - margin.right
+const plotHeight = canvasHeight - margin.top - margin.bottom
+
+// 计算实际导地线高度（考虑弧垂和串长）
+const calculateActualHeights = () => {
+  const hArmNums = props.hArm.map(v => Number(v))
+  const hGSagNum = Number(props.hGSag)
+  const hCSagNum = Number(props.hCSag)
+  const stringGLenNum = Number(props.stringGLen)
+  const stringCLenNum = Number(props.stringCLen)
+  
+  // 地线实际高度 = 挂点高度 - 地线串长 - 地线弧垂 * 2/3
+  // 导线实际高度 = 挂点高度 - 导线串长 - 导线弧垂 * 2/3
+  return hArmNums.map((h, index) => {
+    if (index === 0) {
+      // 地线
+      return h - stringGLenNum - hGSagNum * 2 / 3
+    } else {
+      // 导线
+      return h - stringCLenNum - hCSagNum * 2 / 3
+    }
+  })
+}
+
+// 计算坐标范围
+const calculateRange = () => {
+  // 确保将字符串转换为数字
+  const hArmNums = props.hArm.map(v => Number(v))
+  const gcXNums = props.gcX.map(v => Number(v))
+  const actualHeights = calculateActualHeights()
+  
+  // 包含挂点高度和实际高度
+  const allHeights = [...hArmNums, ...actualHeights, 0]
+  const allX = [...gcXNums, -gcXNums[0] * 0.5, gcXNums[0] * 1.5] // 扩展水平范围
+  
+  const yMin = -10
+  const yMax = Math.max(...allHeights) * 1.15
+  const xMin = Math.min(...allX) * 1.2
+  const xMax = Math.max(...allX) * 1.2
+  
+  return { xMin, xMax, yMin, yMax }
+}
+
+// 坐标转换：数据坐标 -> Canvas 坐标
+const toCanvasX = (x: number, range: ReturnType<typeof calculateRange>): number => {
+  return margin.left + ((x - range.xMin) / (range.xMax - range.xMin)) * plotWidth
+}
+
+const toCanvasY = (y: number, range: ReturnType<typeof calculateRange>): number => {
+  // Canvas Y 轴向下，需要反转
+  return margin.top + plotHeight - ((y - range.yMin) / (range.yMax - range.yMin)) * plotHeight
+}
+
+// 绘制函数
+const draw = () => {
+  if (!ctx) return
+
+  const range = calculateRange()
+
+  // 清除画布
+  ctx.fillStyle = '#fafafa'
+  ctx.fillRect(0, 0, canvasWidth, canvasHeight)
+
+  // 绘制背景网格
+  ctx.strokeStyle = '#e8e8e8'
+  ctx.lineWidth = 1
+
+  // 垂直网格线
+  const xStep = Math.ceil((range.xMax - range.xMin) / 10)
+  for (let x = Math.ceil(range.xMin / xStep) * xStep; x <= range.xMax; x += xStep) {
+    ctx.beginPath()
+    ctx.moveTo(toCanvasX(x, range), margin.top)
+    ctx.lineTo(toCanvasX(x, range), margin.top + plotHeight)
+    ctx.stroke()
+  }
+
+  // 水平网格线
+  const yStep = Math.ceil((range.yMax - range.yMin) / 8)
+  for (let y = Math.ceil(range.yMin / yStep) * yStep; y <= range.yMax; y += yStep) {
+    ctx.beginPath()
+    ctx.moveTo(margin.left, toCanvasY(y, range))
+    ctx.lineTo(margin.left + plotWidth, toCanvasY(y, range))
+    ctx.stroke()
+  }
+
+  // 绘制坐标轴
+  ctx.strokeStyle = '#333'
+  ctx.lineWidth = 1.5
+
+  // Y 轴
+  ctx.beginPath()
+  ctx.moveTo(margin.left, margin.top)
+  ctx.lineTo(margin.left, margin.top + plotHeight)
+  ctx.stroke()
+
+  // X 轴（地面）
+  ctx.beginPath()
+  ctx.moveTo(margin.left, toCanvasY(range.yMin, range))
+  ctx.lineTo(margin.left + plotWidth, toCanvasY(range.yMin, range))
+  ctx.stroke()
+
+  // 绘制刻度标签
+  ctx.fillStyle = '#666'
+  ctx.font = '11px Arial'
+
+  // Y 轴刻度
+  ctx.textAlign = 'right'
+  for (let y = yStep; y <= range.yMax; y += yStep) {
+    const canvasY = toCanvasY(y, range)
+    ctx.fillText(`${y}`, margin.left - 8, canvasY + 4)
+    
+    // 刻度线
+    ctx.beginPath()
+    ctx.moveTo(margin.left - 4, canvasY)
+    ctx.lineTo(margin.left, canvasY)
+    ctx.stroke()
+  }
+
+  // X 轴刻度
+  ctx.textAlign = 'center'
+  for (let x = Math.ceil(range.xMin / xStep) * xStep; x <= range.xMax; x += xStep) {
+    if (x !== 0) {
+      const canvasX = toCanvasX(x, range)
+      ctx.fillText(`${x}`, canvasX, toCanvasY(0, range) + 18)
+      
+      // 刻度线
+      ctx.beginPath()
+      ctx.moveTo(canvasX, toCanvasY(0, range))
+      ctx.lineTo(canvasX, toCanvasY(0, range) + 4)
+      ctx.stroke()
+    }
+  }
+
+  // 轴标签
+  ctx.font = '12px Arial'
+  ctx.fillStyle = '#333'
+  ctx.textAlign = 'center'
+  ctx.fillText('水平距离 (m)', margin.left + plotWidth / 2, canvasHeight - 10)
+  
+  ctx.save()
+  ctx.translate(15, margin.top + plotHeight / 2)
+  ctx.rotate(-Math.PI / 2)
+  ctx.fillText('高度 (m)', 0, 0)
+  ctx.restore()
+
+  // 绘制地面倾角
+  drawGround(range)
+
+  // 绘制导线和地线挂点
+  drawWirePoints(range)
+
+  // 绘制保护角
+  drawShieldingAngle(range)
+}
+
+// 绘制导线和地线挂点
+const drawWirePoints = (range: ReturnType<typeof calculateRange>) => {
+  if (!ctx) return
+  const c = ctx
+  const actualHeights = calculateActualHeights()
+
+  props.hArm.forEach((height, index) => {
+    // 确保将字符串转换为数字
+    const heightNum = Number(height)
+    const actualHeight = actualHeights[index]
+    const wireX = Number(props.gcX[index]) || 0
+    const isGroundWire = index === 0
+    
+    const canvasX = toCanvasX(wireX, range)
+    const canvasY = toCanvasY(heightNum, range)
+    const actualCanvasY = toCanvasY(actualHeight, range)
+
+    // 绘制从挂点到实际位置的虚线（绝缘子串 + 弧垂）
+    c.strokeStyle = isGroundWire ? '#4CAF50' : '#FF9800'
+    c.lineWidth = 2
+    c.setLineDash([4, 4])
+    c.beginPath()
+    c.moveTo(canvasX, canvasY)
+    c.lineTo(canvasX, actualCanvasY)
+    c.stroke()
+    c.setLineDash([])
+
+    // 绘制挂点标记（方形，表示杆塔挂点）
+    c.fillStyle = '#666'
+    c.fillRect(canvasX - 5, canvasY - 5, 10, 10)
+
+    // 绘制实际导地线位置（圆形）
+    c.fillStyle = isGroundWire ? '#4CAF50' : '#FF9800'
+    c.beginPath()
+    c.arc(canvasX, actualCanvasY, 8, 0, Math.PI * 2)
+    c.fill()
+
+    // 标注信息
+    c.fillStyle = '#333'
+    c.font = 'bold 11px Arial'
+    c.textAlign = 'left'
+    
+    const labelX = canvasX + 12
+    const labelY = actualCanvasY - 8
+    
+    const wireName = isGroundWire ? '地线' : `导线${index}`
+    const heightLabel = `H=${actualHeight.toFixed(1)}m`
+    const xLabel = `X=${wireX}m`
+    
+    c.fillText(wireName, labelX, labelY)
+    c.font = '10px Arial'
+    c.fillStyle = '#666'
+    c.fillText(heightLabel, labelX, labelY + 14)
+    c.fillText(xLabel, labelX, labelY + 26)
+  })
+}
+
+// 绘制地面
+const drawGround = (range: ReturnType<typeof calculateRange>) => {
+  if (!ctx) return
+
+  // 确保将字符串转换为数字
+  const groundAngle = Number(props.groundAngels[0]) || 0
+  const angleRad = (groundAngle * Math.PI) / 180
+
+  ctx.strokeStyle = '#795548'
+  ctx.lineWidth = 2
+
+  // 地面线（考虑倾角）
+  const groundLength = range.xMax - range.xMin
+  const dy = Math.tan(angleRad) * groundLength
+
+  const leftX = range.xMin
+  const rightX = range.xMax
+  const leftY = groundAngle >= 0 ? dy : 0
+  const rightY = groundAngle >= 0 ? 0 : -dy
+
+  ctx.beginPath()
+  ctx.moveTo(toCanvasX(leftX, range), toCanvasY(leftY, range))
+  ctx.lineTo(toCanvasX(rightX, range), toCanvasY(rightY, range))
+  ctx.stroke()
+}
+
+// 绘制保护角
+const drawShieldingAngle = (range: ReturnType<typeof calculateRange>) => {
+  if (!ctx || props.hArm.length < 2) return
+
+  const actualHeights = calculateActualHeights()
+  const gwX = Number(props.gcX[0]) || 0
+  const gwY = actualHeights[0]
+  const cwX = Number(props.gcX[1]) || 0
+  const cwY = actualHeights[1]
+
+  const gwCanvasX = toCanvasX(gwX, range)
+  const gwCanvasY = toCanvasY(gwY, range)
+  const cwCanvasX = toCanvasX(cwX, range)
+  const cwCanvasY = toCanvasY(cwY, range)
+
+  // 计算保护角（地线与导线连线与垂直线的夹角）
+  const dx = cwX - gwX
+  const dy = gwY - cwY
+  const shieldingAngle = Math.atan2(dx, dy) * (180 / Math.PI)
+
+  // 绘制从地线到导线1的虚线
+  ctx.strokeStyle = '#9C27B0'
+  ctx.lineWidth = 2
+  ctx.setLineDash([6, 4])
+  ctx.beginPath()
+  ctx.moveTo(gwCanvasX, gwCanvasY)
+  ctx.lineTo(cwCanvasX, cwCanvasY)
+  ctx.stroke()
+  ctx.setLineDash([])
+
+  // // 绘制垂直参考线（从地线向下）
+  // ctx.strokeStyle = 'rgba(156, 39, 176, 0.3)'
+  // ctx.lineWidth = 1
+  // ctx.setLineDash([4, 4])
+  // ctx.beginPath()
+  // ctx.moveTo(gwCanvasX, gwCanvasY)
+  // ctx.lineTo(gwCanvasX, gwCanvasY + 80)
+  // ctx.stroke()
+  // ctx.setLineDash([])
+
+  // // 绘制角度弧
+  // const arcRadius = 30
+  // const verticalAngle = Math.PI / 2 // 向下
+  // const lineAngle = Math.atan2(cwCanvasY - gwCanvasY, cwCanvasX - gwCanvasX)
+
+  ctx.strokeStyle = '#9C27B0'
+  ctx.lineWidth = 1.5
+  ctx.beginPath()
+  // if (dx >= 0) {
+  //   ctx.arc(gwCanvasX, gwCanvasY, arcRadius, Math.PI / 2, lineAngle, true)
+  // } else {
+  //   ctx.arc(gwCanvasX, gwCanvasY, arcRadius, lineAngle, Math.PI / 2, false)
+  // }
+  // ctx.stroke()
+
+  // 计算标注位置（在线的右侧）
+  const midX = (gwCanvasX + cwCanvasX) / 2
+  const midY = (gwCanvasY + cwCanvasY) / 2
+  const labelOffsetX = dx >= 0 ? -45 : 45
+  const labelOffsetY = 0
+
+  // 绘制引线
+  ctx.strokeStyle = '#9C27B0'
+  ctx.lineWidth = 1
+  ctx.beginPath()
+  ctx.moveTo(midX, midY)
+  ctx.lineTo(midX + labelOffsetX, midY + labelOffsetY)
+  ctx.stroke()
+
+  // 绘制标注文字
+  const labelText = `保护角（平均高处）: ${Math.abs(shieldingAngle).toFixed(2)}°`
+  ctx.font = 'bold 12px Arial'
+
+  // 绘制标注文字
+  ctx.fillStyle = '#9C27B0'
+  ctx.textAlign = 'left'
+  ctx.fillText(labelText, midX + labelOffsetX, midY + labelOffsetY)
+}
+
+// 监听参数变化
+watch(
+  () => [props.hArm, props.gcX, props.hCSag, props.hGSag, props.stringCLen, props.stringGLen, props.groundAngels],
+  () => {
+    draw()
+  },
+  { deep: true }
+)
+
+// 初始化
+onMounted(() => {
+  if (canvasRef.value) {
+    ctx = canvasRef.value.getContext('2d')
+    draw()
+  }
+})
+</script>
+
+<style scoped>
+.geometry-container {
+  display: flex;
+  flex-direction: column;
+  align-items: center;
+}
+
+.geometry-canvas {
+  border: 1px solid #e0e0e0;
+  border-radius: 4px;
+  background: #fafafa;
+}
+
+.legend-color {
+  width: 16px;
+  height: 4px;
+  border-radius: 2px;
+}
+
+.legend {
+  padding: 8px;
+  background: #f5f5f5;
+  border-radius: 4px;
+}
+</style>

webui/src/components/Log.vue

@@ -39,7 +39,7 @@ interface LogEntry {
 
 const logs = ref<LogEntry[]>([])
 const logContainer = ref<HTMLElement | null>(null)
-const expanded = ref(true)
+const expanded = ref(false)  // 默认折叠
 const lastTripRates = ref<number[]>([])
 
 const addLog = (level: LogEntry['level'], message: string) => {

webui/src/components/ParameterForm.vue

@@ -2,180 +2,222 @@
   <q-layout view="lHh lpr lFf">
       <q-header elevated class="bg-indigo-600 text-white">
         <q-toolbar>
-          <q-toolbar-title>
+          <q-toolbar-title class="q-py-sm">
             <div class="flex items-center gap-2">
               <q-icon name="flash_on" size="md" />
               <span class="text-xl font-bold">EGM 输电线路绕击跳闸率计算</span>
             </div>
+            <div v-if="currentFilePath" class="text-sm truncate max-w-2xl bg-white text-green-700 px-2 py-0.5 rounded mt-1" :title="currentFilePath">
+              {{ currentFilePath }}
+            </div>
           </q-toolbar-title>
         </q-toolbar>
       </q-header>
 
       <q-page-container>
+        
         <q-page class="q-pa-md">
-          <div class="max-w-4xl mx-auto">
+          <div class="max-w-7xl mx-auto">
-            <!-- 基本参数 -->
+            <!-- 基本参数 + 杆塔几何结构 并排布局 -->
-            <q-card class="q-mb-md shadow-2">
+            <div class="row q-col-gutter-md q-mb-md items-stretch" style="min-height: 500px;">
-              <q-card-section class="bg-indigo-50">
+              <!-- 左侧：基本参数 -->
-                <div class="text-h6 text-indigo-900 flex items-center gap-2">
+              <div class="col-12 col-lg-6" style="display: flex;">
-                  <q-icon name="settings" />
+                <q-card class="shadow-2" style="flex: 1;">
-                  基本参数
+                  <q-card-section class="bg-indigo-50">
-                </div>
+                    <div class="text-h6 text-indigo-900 flex items-center gap-2">
-              </q-card-section>
+                      <q-icon name="settings" />
+                      基本参数
+                    </div>
+                  </q-card-section>
 
-              <q-card-section>
+                  <q-card-section>
-                <div class="row q-col-gutter-md">
+                    <div class="row q-col-gutter-md">
-                  <div class="col-12 col-md-6">
+                      <div class="col-12 col-md-6">
-                    <q-select
+                        <q-select
-                      v-model="params.parameter.rated_voltage"
+                          v-model="params.parameter.rated_voltage"
-                      :options="voltageOptions"
+                          :options="voltageOptions"
-                      label="额定电压等级 (kV)"
+                          label="额定电压等级 (kV)"
-                    />
+                        />
-                  </div>
+                      </div>
-                  <div class="col-12 col-md-6">
+                      <div class="col-12 col-md-6">
-                    <q-input
+                        <q-input
-                      :model-value="currentType"
+                          :model-value="currentType"
-                      label="电压类型 (AC/DC)"
+                          label="电压类型 (AC/DC)"
-                      readonly
+                          readonly
-                    >
+                        >
-                      <q-tooltip>交流(AC)或直流(DC)，由电压等级自动判断</q-tooltip>
+                          <q-tooltip>交流(AC)或直流(DC)，由电压等级自动判断</q-tooltip>
-                    </q-input>
+                        </q-input>
-                  </div>
+                      </div>
-                  <div class="col-12 col-md-6">
+                      <div class="col-12 col-md-6">
-                    <q-input
+                        <q-input
-                      v-model="params.parameter.h_c_sag"
+                          v-model="params.parameter.h_c_sag"
-                      type="number"
+                          type="number"
-                      step="0.01"
+                          step="0.01"
-                      label="导线弧垂 (m)"
+                          label="导线弧垂 (m)"
-                    >
+                        >
-                      <q-tooltip>导线在最大弧垂状态下相对于挂点的垂直距离</q-tooltip>
+                          <q-tooltip>导线在最大弧垂状态下相对于挂点的垂直距离</q-tooltip>
-                    </q-input>
+                        </q-input>
-                  </div>
+                      </div>
-                  <div class="col-12 col-md-6">
+                      <div class="col-12 col-md-6">
-                    <q-input
+                        <q-input
-                      v-model="params.parameter.h_g_sag"
+                          v-model="params.parameter.h_g_sag"
-                      type="number"
+                          type="number"
-                      step="0.01"
+                          step="0.01"
-                      label="地线弧垂 (m)"
+                          label="地线弧垂 (m)"
-                    >
+                        >
-                      <q-tooltip>地线在最大弧垂状态下相对于挂点的垂直距离</q-tooltip>
+                          <q-tooltip>地线在最大弧垂状态下相对于挂点的垂直距离</q-tooltip>
-                    </q-input>
+                        </q-input>
-                  </div>
+                      </div>
-                  <div class="col-12 col-md-6">
+                      <div class="col-12 col-md-6">
-                    <q-input
+                        <q-input
-                      v-model="params.parameter.insulator_c_len"
+                          v-model="params.parameter.insulator_c_len"
-                      type="number"
+                          type="number"
-                      step="0.01"
+                          step="0.01"
-                      label="导线串子绝缘长度 (m)"
+                          label="导线串子绝缘长度 (m)"
-                    >
+                        >
-                      <q-tooltip>绝缘子串的总长度</q-tooltip>
+                          <q-tooltip>绝缘子串的总长度</q-tooltip>
-                    </q-input>
+                        </q-input>
-                  </div>
+                      </div>
-                  <div class="col-12 col-md-6">
+                      <div class="col-12 col-md-6">
-                    <q-input
+                        <q-input
-                      v-model="params.parameter.string_c_len"
+                          v-model="params.parameter.string_c_len"
-                      type="number"
+                          type="number"
-                      step="0.1"
+                          step="0.1"
-                      label="导线串长 (m)"
+                          label="导线串长 (m)"
-                    >
+                        >
-                      <q-tooltip>导线绝缘子串的总长度</q-tooltip>
+                          <q-tooltip>导线绝缘子串的总长度</q-tooltip>
-                    </q-input>
+                        </q-input>
-                  </div>
+                      </div>
-                  <div class="col-12 col-md-6">
+                      <div class="col-12 col-md-6">
-                    <q-input
+                        <q-input
-                      v-model="params.parameter.string_g_len"
+                          v-model="params.parameter.string_g_len"
-                      type="number"
+                          type="number"
-                      step="0.1"
+                          step="0.1"
-                      label="地线串长 (m)"
+                          label="地线串长 (m)"
-                    >
+                        >
-                      <q-tooltip>地线绝缘子串的总长度</q-tooltip>
+                          <q-tooltip>地线绝缘子串的总长度</q-tooltip>
-                    </q-input>
+                        </q-input>
-                  </div>
+                      </div>
-                  <div class="col-12 col-md-6">
+                      <div class="col-12 col-md-6">
-                    <q-input
+                        <q-input
-                      v-model="params.parameter.altitude"
+                          v-model="params.parameter.altitude"
-                      type="number"
+                          type="number"
-                      label="海拔高度 (m)"
+                          label="海拔高度 (m)"
-                    >
+                        >
-                      <q-tooltip>用于修正绝缘子串的闪络电压</q-tooltip>
+                          <q-tooltip>用于修正绝缘子串的闪络电压</q-tooltip>
-                    </q-input>
+                        </q-input>
-                  </div>
+                      </div>
-                  <div class="col-12 col-md-6">
+                      <div class="col-12 col-md-6">
-                    <q-input
+                        <q-input
-                      v-model="params.parameter.td"
+                          v-model="params.parameter.td"
-                      type="number"
+                          type="number"
-                      label="雷暴日 (d)"
+                          label="雷暴日 (d)"
-                    >
+                        >
-                      <q-tooltip>一年中雷暴天数，用于计算地闪密度</q-tooltip>
+                          <q-tooltip>一年中雷暴天数，用于计算地闪密度</q-tooltip>
-                    </q-input>
+                        </q-input>
-                  </div>
+                      </div>
-                </div>
+                      <div class="col-12 col-md-6">
+                        <q-input
+                          v-model="params.parameter.z_0"
+                          type="number"
+                          label="雷电波阻抗 (Ω)"
+                        >
+                          <q-tooltip>雷电波阻抗，用于计算最小雷电流。</q-tooltip>
+                        </q-input>
+                      </div>
+                      <div class="col-12 col-md-6">
+                        <q-input
+                          v-model="params.parameter.z_c"
+                          type="number"
+                          label="导线波阻抗 (Ω)"
+                        >
+                          <q-tooltip>导线波阻抗，用于计算最小雷电流。</q-tooltip>
+                        </q-input>
+                      </div>
+                    </div>
 
-                <!-- 导、地线挂点高度 -->
+                    <!-- 导、地线挂点高度 -->
-                <div class="q-mt-md">
+                    <div class="q-mt-md">
-                  <div class="text-subtitle2 q-mb-sm">
+                      <div class="text-subtitle2 q-mb-sm">
-                    导、地线挂点垂直坐标 (m) 
+                        导、地线挂点垂直坐标 (m)
-                  </div>
+                      </div>
-                  <div class="row q-col-gutter-sm">
+                      <div class="row q-col-gutter-sm">
-                    <div class="col" v-for="(h, index) in params.parameter.h_arm" :key="index">
+                        <div class="col" v-for="(_, index) in params.parameter.h_arm" :key="index">
-                      <q-input
+                          <q-input
-                        v-model="params.parameter.h_arm[index]"
+                            v-model="params.parameter.h_arm[index]"
-                        type="number"
+                            type="number"
-                        step="0.1"
+                            step="0.1"
-                        :label="index === 0 ? '地线' : `导线 ${index}`"
+                            :label="index === 0 ? '地线' : `导线 ${index}`"
-                        dense
+                            dense
-                      />
+                          />
+                        </div>
+                        <div class="col-auto">
+                          <q-btn flat round color="primary" icon="add" @click="addHArm" :disable="params.parameter.h_arm.length >= 4" v-show="params.parameter.h_arm.length === 2" />
+                        </div>
+                        <div class="col-auto">
+                          <q-btn flat round color="negative" icon="remove" @click="removeHArm" :disable="params.parameter.h_arm.length <= 2" v-show="params.parameter.h_arm.length === 4" />
+                        </div>
+                      </div>
                     </div>
-                    <div class="col-auto">
-                      <q-btn flat round color="primary" icon="add" @click="addHArm" :disable="params.parameter.h_arm.length >= 4" v-show="params.parameter.h_arm.length === 2" />
-                    </div>
-                    <div class="col-auto">
-                      <q-btn flat round color="negative" icon="remove" @click="removeHArm" :disable="params.parameter.h_arm.length <= 2" v-show="params.parameter.h_arm.length === 4" />
-                    </div>
-                  </div>
-                </div>
 
-                <!-- 导、地线水平坐标 -->
+                    <!-- 导、地线水平坐标 -->
-                <div class="q-mt-md">
+                    <div class="q-mt-md">
-                  <div class="text-subtitle2 q-mb-sm">
+                      <div class="text-subtitle2 q-mb-sm">
-                    导、地线挂点水平坐标 (m)
+                        导、地线挂点水平坐标 (m)
-                  </div>
+                      </div>
-                  <div class="row q-col-gutter-sm">
+                      <div class="row q-col-gutter-sm">
-                    <div class="col" v-for="(x, index) in params.parameter.gc_x" :key="index">
+                        <div class="col" v-for="(_, index) in params.parameter.gc_x" :key="index">
-                      <q-input
+                          <q-input
-                        v-model="params.parameter.gc_x[index]"
+                            v-model="params.parameter.gc_x[index]"
-                        type="number"
+                            type="number"
-                        step="0.1"
+                            step="0.1"
-                        :label="index === 0 ? '地线' : `导线 ${index}`"
+                            :label="index === 0 ? '地线' : `导线 ${index}`"
-                        dense
+                            dense
-                      />
+                          />
+                        </div>
+                        <div class="col-auto">
+                          <q-btn flat round color="primary" icon="add" @click="addGcX" :disable="params.parameter.gc_x.length >= 4" v-show="params.parameter.gc_x.length === 2" />
+                        </div>
+                        <div class="col-auto">
+                          <q-btn flat round color="negative" icon="remove" @click="removeGcX" :disable="params.parameter.gc_x.length <= 2" v-show="params.parameter.gc_x.length === 4" />
+                        </div>
+                      </div>
                     </div>
-                    <div class="col-auto">
-                      <q-btn flat round color="primary" icon="add" @click="addGcX" :disable="params.parameter.gc_x.length >= 4" v-show="params.parameter.gc_x.length === 2" />
-                    </div>
-                    <div class="col-auto">
-                      <q-btn flat round color="negative" icon="remove" @click="removeGcX" :disable="params.parameter.gc_x.length <= 2" v-show="params.parameter.gc_x.length === 4" />
-                    </div>
-                  </div>
-                </div>
 
-                <!-- 地面倾角 -->
+                    <!-- 地面倾角 -->
-                <div class="q-mt-md">
+                    <div class="q-mt-md">
-                  <div class="row q-col-gutter-sm">
+                      <div class="row q-col-gutter-sm">
-                    <div class="col-12 col-md-6">
+                        <div class="col-12 col-md-6">
-                      <q-input
+                          <q-input
-                        v-model="params.parameter.ground_angels[0]"
+                            v-model="params.parameter.ground_angels[0]"
-                        type="number"
+                            type="number"
-                        step="1"
+                            step="1"
-                        label="地面倾角 (°) - 向下为正"
+                            label="地面倾角 (°) - 向下为正"
-                      >
+                          >
-                        <q-tooltip>地面倾斜角度，向下为正值</q-tooltip>
+                            <q-tooltip>地面倾斜角度，向下为正值</q-tooltip>
-                      </q-input>
+                          </q-input>
+                        </div>
+                      </div>
                     </div>
-                  </div>
+                  </q-card-section>
-                </div>
+                </q-card>
-              </q-card-section>
+              </div>
-            </q-card>
+
+              <!-- 右侧：杆塔几何结构可视化 -->
+              <div class="col-12 col-lg-6" style="display: flex;">
+                <Geometry
+                  :h-arm="params.parameter.h_arm"
+                  :gc-x="params.parameter.gc_x"
+                  :h-c-sag="params.parameter.h_c_sag"
+                  :h-g-sag="params.parameter.h_g_sag"
+                  :string-c-len="params.parameter.string_c_len"
+                  :string-g-len="params.parameter.string_g_len"
+                  :ground-angels="params.parameter.ground_angels"
+                  class="shadow-2"
+                  style="flex: 1;"
+                />
+              </div>
+            </div>
 
             <!-- 高级参数 -->
             <q-card class="q-mb-md shadow-2">
@@ -231,6 +273,26 @@
                     </q-input>
                   </div>
                 </div>
+                <!-- 50%击穿电压设置开关 -->
+                <div class="q-mt-md">
+                  <q-toggle
+                    v-model="showU50"
+                    label="设置50%击穿电压 (U_50)"
+                    color="primary"
+                  />
+                </div>
+                <div class="row q-col-gutter-md q-mt-sm" v-if="showU50">
+                  <div class="col-12">
+                    <q-input
+                      v-model="params.advance.u_50"
+                      type="number"
+                      step="1"
+                      label="50%击穿电压 U_50 (kV)"
+                    >
+                      <q-tooltip>自定义50%击穿电压值，默认-1表示使用公式计算</q-tooltip>
+                    </q-input>
+                  </div>
+                </div>
               </q-card-section>
             </q-card>
 
@@ -245,15 +307,6 @@
 
               <q-card-section>
                 <div class="row q-col-gutter-md">
-                  <div class="col-12 col-md-6">
-                    <q-input
-                      v-model="params.optional.voltage_n"
-                      type="number"
-                      label="计算时电压分成多少份"
-                    >
-                      <q-tooltip>将电压波形离散化的份数，即将交流电压在一个周期内的不同值进行计算。</q-tooltip>
-                    </q-input>
-                  </div>
                   <div class="col-12 col-md-6">
                     <q-input
                       v-model="params.optional.max_i"
@@ -304,7 +357,7 @@
               />
             </div>
 
-            <!-- 隐藏的文件输入 -->
+            <!-- 隐藏的文件输入（开发模式备用） -->
             <input
               ref="fileInput"
               type="file"
@@ -351,6 +404,9 @@
             <!-- 运行日志 -->
             <LogComponent ref="logRef" />
 
+            <!-- EGM 动画可视化 -->
+            <Animation ref="animationRef" class="q-mt-md" />
+
           </div>
         </q-page>
       </q-page-container>
@@ -358,9 +414,11 @@
 </template>
 
 <script setup lang="ts">
-import { ref, reactive, computed, onMounted, onUnmounted, watch } from 'vue'
+import { ref, reactive, computed, onMounted, onUnmounted, watch, toRaw } from 'vue'
 import type { AllParameters } from '@/types'
 import LogComponent from './Log.vue'
+import Animation from './Animation.vue'
+import Geometry from './Geometry.vue'
 
 // 默认参数
 const defaultParams: AllParameters = {
@@ -376,15 +434,18 @@ const defaultParams: AllParameters = {
     gc_x: [17.9, 17],
     ground_angels: [0],
     altitude: 1000,
-    td: 20
+    td: 20,
+    z_0: 300,
+    z_c: 251
   },
   advance: {
     ng: -1,
     Ip_a: -1,
-    Ip_b: -1
+    Ip_b: -1,
+    u_50: -1
   },
   optional: {
-    voltage_n: 3,
+    voltage_n: 1,
     max_i: 300
   }
 }
@@ -394,9 +455,14 @@ const calculating = ref(false)
 const result = ref<{ tripping_rate: number; n_sf_phases: number[]; message: string } | null>(null)
 const error = ref<string | null>(null)
 const logRef = ref<InstanceType<typeof LogComponent> | null>(null)
+const animationRef = ref<InstanceType<typeof Animation> | null>(null)
 const fileInput = ref<HTMLInputElement | null>(null)
+// 当前打开的文件路径
+const currentFilePath = ref<string>('')
 // 雷电流概率密度系数设置开关
 const showIpCoefficients = ref(false)
+// 50%击穿电压设置开关
+const showU50 = ref(false)
 
 const voltageOptions = [
   '110kV', '220kV', '330kV', '500kV', '750kV','1000kV',
@@ -408,14 +474,12 @@ const currentType = computed(() => {
   return params.parameter.rated_voltage.includes('±') ? 'DC' : 'AC'
 })
 
-// 监听电压等级变化，同步更新 ac_or_dc 和 voltage_n 字段
+// 监听电压等级变化，同步更新 ac_or_dc 字段
 watch(
   () => params.parameter.rated_voltage,
   (newVoltage) => {
     const isDC = newVoltage.includes('±')
     params.parameter.ac_or_dc = isDC ? 'DC' : 'AC'
-    // DC 时电压份数为 1，AC 时为 3
-    params.optional.voltage_n = isDC ? 1 : 3
   },
   { immediate: true }
 )
@@ -432,6 +496,17 @@ watch(
   }
 )
 
+// 监听50%击穿电压开关
+watch(
+  showU50,
+  (show) => {
+    if (!show) {
+      // 关闭时重置为 -1（使用公式计算）
+      params.advance.u_50 = -1
+    }
+  }
+)
+
 // 雷暴日与地闪密度相互转换，公式：ng = 0.023 * td^3
 // 标志位避免循环更新
 let isUpdatingFromWatch = false
@@ -523,6 +598,27 @@ const calculate = async () => {
     }
   }
 
+  // 验证50%击穿电压
+  if (showU50.value) {
+    const u50 = Number(params.advance.u_50)
+    if (u50 < 1000) {
+      error.value = '请检查参数："50%击穿电压 U_50"的值应该大于等于 1000 kV'
+      logRef.value?.addLog('error', '请检查参数："50%击穿电压 U_50"的值应该大于等于 1000 kV')
+      return
+    }
+  }
+
+  // 验证导、地线挂点垂直坐标顺序：地线 > 导线1 > 导线2 > 导线3
+  const hArm = params.parameter.h_arm.map(Number)
+  for (let i = 0; i < hArm.length - 1; i++) {
+    if (hArm[i] <= hArm[i + 1]) {
+      const labels = ['地线', '导线1', '导线2', '导线3']
+      error.value = `请检查参数：${labels[i]}垂直坐标应大于${labels[i + 1]}垂直坐标`
+      logRef.value?.addLog('error', error.value)
+      return
+    }
+  }
+
   calculating.value = true
   result.value = null
   error.value = null
@@ -532,7 +628,19 @@ const calculate = async () => {
     if (window.pywebview) {
       // 后台线程启动计算，实时日志通过 addLogFromBackend 推送
       // 结果通过 receiveResult 回调接收
-      await window.pywebview.api.calculate(params)
+      // 传递动画启用状态
+      // 使用 toRaw 解包响应式对象，确保 pywebview 能正确序列化参数
+      const rawParams = toRaw(params)
+      const paramsWithAnimation = {
+        parameter: toRaw(rawParams.parameter),
+        advance: toRaw(rawParams.advance),
+        optional: {
+          ...toRaw(rawParams.optional),
+          voltage_n: 1  // 强制将电压份数设置为1
+        },
+        animation_enabled: animationRef.value?.isEnabled() ?? false
+      }
+      await window.pywebview.api.calculate(paramsWithAnimation)
       // 不在这里设置 calculating = false，等待 receiveResult 回调
     } else {
       // 开发模式下的模拟
@@ -684,6 +792,8 @@ const exportConfig = async () => {
     if (window.pywebview) {
       const response = await window.pywebview.api.export_config(params)
       if (response.success) {
+        // 显示导出的文件路径
+        currentFilePath.value = response.file_path || ''
         logRef.value?.addLog('info', response.message)
       } else {
         logRef.value?.addLog('warning', response.message)
@@ -707,12 +817,44 @@ const exportConfig = async () => {
   }
 }
 
-// 导入配置 - 触发文件选择
+// 导入配置 - 调用后端文件对话框
-const importConfig = () => {
+const importConfig = async () => {
-  fileInput.value?.click()
+  try {
+    if (window.pywebview) {
+      const response = await window.pywebview.api.import_config()
+      if (response.success && response.params) {
+        // 合并导入的参数到当前参数
+        if (response.params.parameter) {
+          Object.assign(params.parameter, response.params.parameter)
+        }
+        if (response.params.advance) {
+          Object.assign(params.advance, response.params.advance)
+        }
+        if (response.params.optional) {
+          Object.assign(params.optional, response.params.optional)
+        }
+        
+        // 显示完整文件路径
+        currentFilePath.value = response.file_path || ''
+        
+        logRef.value?.addLog('info', `成功导入配置: ${response.file_path}`)
+        result.value = null
+        error.value = null
+      } else if (!response.success && response.message !== '用户取消了选择') {
+        error.value = response.message || '导入失败'
+        logRef.value?.addLog('error', response.message || '导入失败')
+      }
+    } else {
+      // 开发模式下使用 HTML 文件输入
+      fileInput.value?.click()
+    }
+  } catch (e: any) {
+    error.value = e.message || '导入失败'
+    logRef.value?.addLog('error', e.message || '导入失败')
+  }
 }
 
-// 处理文件选择
+// 处理文件选择（开发模式备用）
 const handleFileSelect = async (event: Event) => {
   const input = event.target as HTMLInputElement
   const file = input.files?.[0]
@@ -733,6 +875,8 @@ const handleFileSelect = async (event: Event) => {
       Object.assign(params.optional, importedParams.optional)
     }
     
+    currentFilePath.value = file.name
+    
     logRef.value?.addLog('info', `成功导入配置: ${file.name}`)
     result.value = null
     error.value = null
@@ -751,6 +895,7 @@ declare global {
     pywebview?: {
       api: {
         calculate: (params: AllParameters) => Promise<any>
+        import_config: () => Promise<any>
         export_config: (params: AllParameters) => Promise<any>
         export_log: (logText: string) => Promise<any>
       }
@@ -760,6 +905,15 @@ declare global {
   }
 }
 
+// 禁用数字输入框的滚轮调整功能
+const preventWheelOnNumberInput = (e: Event) => {
+  const target = e.target as HTMLInputElement
+  if (target && target.type === 'number') {
+    e.preventDefault()
+    ;(target as HTMLElement).blur()
+  }
+}
+
 // 注册全局日志接收函数，供后端实时调用
 onMounted(() => {
   // 程序启动时，根据雷暴日初始化地闪密度
@@ -767,6 +921,9 @@ onMounted(() => {
     params.advance.ng = Math.round(0.023 * Math.pow(params.parameter.td, 1.3) * 100) / 100
   }
 
+  // 禁用数字输入框的滚轮调整
+  document.addEventListener('wheel', preventWheelOnNumberInput, { passive: false })
+
   // 实时日志推送
   window.addLogFromBackend = (log: { level: string; time: string; message: string }) => {
     logRef.value?.addLog(log.level as any, log.message)
@@ -789,6 +946,7 @@ onMounted(() => {
 })
 
 onUnmounted(() => {
+  document.removeEventListener('wheel', preventWheelOnNumberInput)
   window.addLogFromBackend = undefined
   window.receiveResult = undefined
 })
@@ -799,4 +957,15 @@ onUnmounted(() => {
   user-select: text;
   cursor: text;
 }
+
+/* 隐藏数字输入框的上下箭头 */
+:deep(input[type="number"]) {
+  -moz-appearance: textfield;
+}
+
+:deep(input[type="number"]::-webkit-inner-spin-button),
+:deep(input[type="number"]::-webkit-outer-spin-button) {
+  -webkit-appearance: none;
+  margin: 0;
+}
 </style>

webui/src/types/index.ts

@@ -1,4 +1,5 @@
 // EGM 计算参数类型定义
+// Version: 1.0.11
 
 export interface Parameter {
   // 基本参数
@@ -14,12 +15,15 @@ export interface Parameter {
   ground_angels: number[]      // 地面倾角 (°)
   altitude: number             // 海拔高度 (m)
   td: number                   // 雷暴日 (d)
+  z_0: number                  // 雷电波阻抗 (Ω)，默认 300
+  z_c: number                  // 导线波阻抗 (Ω)，默认 251
 }
 
 export interface AdvanceParameter {
   ng: number                   // 地闪密度 (次/(km²·a))
   Ip_a: number                 // 雷电流概率密度曲线系数a
   Ip_b: number                 // 雷电流概率密度曲线系数b
+  u_50: number                 // 50%击穿电压 (kV)，-1表示自动计算
 }
 
 export interface OptionalParameter {

webui/src/vite-env.d.ts

@@ -0,0 +1,3 @@
+/// <reference types="vite/client" />
+
+declare const __APP_VERSION__: string

webui/vite.config.ts

@@ -2,13 +2,29 @@ import { defineConfig } from 'vite'
 import vue from '@vitejs/plugin-vue'
 import { quasar, transformAssetUrls } from '@quasar/vite-plugin'
 import { fileURLToPath, URL } from 'node:url'
+import { readFileSync } from 'node:fs'
+
+const version = readFileSync(fileURLToPath(new URL('../VERSION', import.meta.url)), 'utf-8').trim()
 
 export default defineConfig({
+  define: {
+    __APP_VERSION__: JSON.stringify(version)
+  },
+  base: './',
   plugins: [
     vue({
       template: { transformAssetUrls }
     }),
-    quasar()
+    quasar(),
+    {
+      name: 'html-version',
+      transformIndexHtml(html) {
+        return html.replace(
+          /<title>EGM 输电线路绕击跳闸率计算( v[\d.]+)?<\/title>/,
+          `<title>EGM 输电线路绕击跳闸率计算 v${version}</title>`
+        )
+      }
+    }
   ],
   resolve: {
     alias: {

webview_app.py

@@ -9,6 +9,7 @@ import json
 import math
 import threading
 import queue
+import tomllib
 from pathlib import Path
 from typing import Dict, Any, List
 from datetime import datetime
@@ -23,6 +24,127 @@ from core import Parameter
 from main import parameter_display, run_egm
 
 
+class WebAnimation:
+    """
+    Web 动画类，将 Python 端的 Animation 调用映射到前端 JavaScript
+    对应 Animation.vue 的功能
+    
+    注意：动画的启用/禁用由前端用户通过"启用动画"开关控制，
+    后端只负责发送绘制指令，前端根据 enabled 状态决定是否执行
+    """
+
+    def __init__(self, window=None):
+        self._window = window
+
+    def set_window(self, window):
+        """设置窗口对象"""
+        self._window = window
+
+    def enable(self, enabled: bool):
+        """
+        启用/禁用动画（由前端用户控制）
+        此方法保留以兼容接口，但实际启用状态由前端控制
+        """
+        if self._window:
+            js_code = f'if(window.animationApi){{window.animationApi.enable({str(enabled).lower()})}}'
+            self._window.evaluate_js(js_code)
+
+    def init_fig(self):
+        """初始化画布"""
+        if not self._window:
+            return
+        js_code = 'if(window.animationApi){window.animationApi.initFig()}'
+        self._window.evaluate_js(js_code)
+
+    def add_rs(self, rs: float, rs_x: float, rs_y: float):
+        """
+        添加地线保护弧（RS 圆）
+        对应 animation.py 的 add_rs 方法
+        """
+        if not self._window:
+            return
+        js_code = f'if(window.animationApi){{window.animationApi.addRs({rs}, {rs_x}, {rs_y})}}'
+        self._window.evaluate_js(js_code)
+
+    def add_rc(self, rc: float, rc_x: float, rc_y: float):
+        """
+        添加导线暴露弧（RC 圆）
+        对应 animation.py 的 add_rc 方法
+        """
+        if not self._window:
+            return
+        js_code = f'if(window.animationApi){{window.animationApi.addRc({rc}, {rc_x}, {rc_y})}}'
+        self._window.evaluate_js(js_code)
+
+    def add_rg_line(self, line_func):
+        """
+        添加地面线（RG 线）
+        对应 animation.py 的 add_rg_line 方法
+
+        Args:
+            line_func: 一个函数，接收 x 返回 y
+        """
+        if not self._window:
+            return
+        # 生成线上的点，传递给前端
+        # 由于无法直接传递函数，我们预先计算一些点
+        import numpy as np
+        x_points = np.linspace(0, 300, 50)
+        y_points = [line_func(x) for x in x_points]
+        points = list(zip(x_points.tolist(), y_points))
+
+        js_code = f'''
+        if(window.animationApi){{
+            window.animationApi.addRgLine({json.dumps(points)})
+        }}
+        '''
+        self._window.evaluate_js(js_code)
+
+    def add_expose_area(
+        self,
+        rc_x: float,
+        rc_y: float,
+        intersection_x1: float,
+        intersection_y1: float,
+        intersection_x2: float,
+        intersection_y2: float
+    ):
+        """
+        添加暴露弧区域（两条红线）
+        对应 animation.py 的 add_expose_area 方法
+        """
+        if not self._window:
+            return
+        js_code = f'''if(window.animationApi){{
+            window.animationApi.addExposeArea(
+                {rc_x}, {rc_y},
+                {intersection_x1}, {intersection_y1},
+                {intersection_x2}, {intersection_y2}
+            )
+        }}'''
+        self._window.evaluate_js(js_code)
+
+    def clear(self):
+        """清除画布"""
+        if not self._window:
+            return
+        js_code = 'if(window.animationApi){window.animationApi.clear()}'
+        self._window.evaluate_js(js_code)
+
+    def pause(self):
+        """
+        暂停并刷新
+        对应 animation.py 的 pause 方法
+        """
+        if not self._window:
+            return
+        js_code = 'if(window.animationApi){window.animationApi.pause()}'
+        self._window.evaluate_js(js_code)
+        # 添加延迟以便动画可见
+        import time
+        time.sleep(0.1)  # 增加延迟，让用户看清动画
+
+
 class WebHandler:
     """Web日志处理器"""
     def __init__(self, callback=None):
@@ -86,6 +208,7 @@ class EGMWebApp:
         self._loguru_handler_id = None
         self._log_queue: queue.Queue = queue.Queue()
         self._running = False
+        self.animation = WebAnimation()  # Web 动画实例
 
     def _process_log_queue(self):
         """处理日志队列，在主线程中定时调用"""
@@ -193,12 +316,13 @@ class EGMWebApp:
             para.insulator_c_len = float(parameter_data.get('insulator_c_len', 7.02))
             para.string_c_len = float(parameter_data.get('string_c_len', 9.2))
             para.string_g_len = float(parameter_data.get('string_g_len', 0.5))
-            para.gc_x = list(parameter_data.get('gc_x', [17.9, 17]))
+            # 确保数组元素转换为数字类型
+            para.gc_x = [float(x) for x in parameter_data.get('gc_x', [17.9, 17])]
             para.ground_angels = [
-                angel / 180 * math.pi
+                float(angel) / 180 * math.pi
                 for angel in parameter_data.get('ground_angels', [0])
             ]
-            para.h_arm = list(parameter_data.get('h_arm', [150, 130]))
+            para.h_arm = [float(h) for h in parameter_data.get('h_arm', [150, 130])]
             para.altitude = int(parameter_data.get('altitude', 1000))
             # 解析电压等级字符串，如 "500kV" -> 500
             rated_voltage_str = str(parameter_data.get('rated_voltage', '500kV'))
@@ -207,9 +331,12 @@ class EGMWebApp:
             para.ng = float(advance_data.get('ng', -1))
             para.Ip_a = float(advance_data.get('Ip_a', -1))
             para.Ip_b = float(advance_data.get('Ip_b', -1))
+            para.u_50 = float(advance_data.get('u_50', -1))
 
             para.voltage_n = int(optional_data.get('voltage_n', 3))
             para.max_i = float(optional_data.get('max_i', 200))
+            para.z_0 = float(parameter_data.get('z_0', 300))
+            para.z_c = float(parameter_data.get('z_c', 251))
 
             # 设置 ac_or_dc 参数
             ac_or_dc_value = str(parameter_data.get('ac_or_dc', 'AC'))
@@ -220,8 +347,12 @@ class EGMWebApp:
 
             logger.info("开始执行 EGM 计算...")
 
+            # 根据前端动画启用状态决定是否传递 animation 对象
+            animation_enabled = params.get('animation_enabled', False)
+            animation_obj = self.animation if animation_enabled else None
+
             # 调用 main.py 的核心计算函数
-            result = run_egm(para)
+            result = run_egm(para, animation_obj)
 
             self.add_log("info", "EGM 计算完成")
 
@@ -395,6 +526,46 @@ class EGMWebApp:
                 "message": f"保存失败: {str(e)}"
             }
 
+    def import_config(self) -> Dict[str, Any]:
+        """
+        导入配置从 TOML 文件，弹出打开对话框
+
+        Returns:
+            包含解析后的参数和文件路径的字典
+        """
+        try:
+            # 打开文件选择对话框
+            result = self.window.create_file_dialog(
+                webview.OPEN_DIALOG,
+                directory='',
+                file_types=('TOML Files (*.toml)', 'All files (*.*)')
+            )
+            
+            if result and len(result) > 0:
+                file_path = result[0]
+                
+                # 读取并解析 TOML 文件
+                with open(file_path, 'rb') as f:
+                    toml_data = tomllib.load(f)
+                
+                return {
+                    "success": True,
+                    "message": f"成功导入配置",
+                    "file_path": file_path,
+                    "params": toml_data
+                }
+            else:
+                return {
+                    "success": False,
+                    "message": "用户取消了选择"
+                }
+        except Exception as e:
+            logger.error(f"导入配置失败: {str(e)}")
+            return {
+                "success": False,
+                "message": f"导入失败: {str(e)}"
+            }
+
     def get_default_config(self) -> Dict[str, Any]:
         """
         获取默认配置
@@ -434,7 +605,14 @@ def start_webview():
     # 确定前端 URL
     # 在开发环境中使用 Vite 开发服务器
     # 在生产环境中使用构建后的文件
-    dev_mode = os.getenv('EGM_DEV_MODE', 'true').lower() == 'true'
+    
+    # 检查是否在打包环境中运行
+    if getattr(sys, 'frozen', False):
+        # 打包环境：强制使用生产模式，禁用调试
+        dev_mode = False
+    else:
+        # 开发环境：通过环境变量控制
+        dev_mode = os.getenv('EGM_DEV_MODE', 'true').lower() == 'true'
 
     if dev_mode:
         # 开发模式：使用 Vite 开发服务器
@@ -459,7 +637,7 @@ def start_webview():
         title='EGM 输电线路绕击跳闸率计算',
         url=url,
         js_api=api,
-        width=1200,
+        width=1500,
         height=900,
         resizable=True,
         min_size=(800, 600)
@@ -467,6 +645,7 @@ def start_webview():
     
     # 将窗口对象传递给 API
     api.window = window
+    api.animation.set_window(window)
 
     # 启动
     logger.info("启动 EGM Web 界面...")